Non ne no fatto un utilizzo "avanzato": mi ricordo che le prime versioni del driver Ascom Eqmod richiedevano di selezionare la funzione POTH per fare comunicare contemporaneamente la montatura ed il planetario software (nel mio caso la EQ6 controllata dalle istruzioni EQMod e Starry Night Pro che controllava la montatura). Dalle versioni successive in poi, non è stato più necessario far comunicare telescopio e montatura attraverso il POTH.
C'è un help file che potrebbe esserti utile:
http://ascom-standards.org/FAQs/POTH.htmPOTH has many useful features such as traffic logging and its own set of "handset" controls for the telescope, dome, and focuser. There is a detailed help file for POTH, accessible from the Start menu, ASCOM Platform, Scope/Dome hubs. It also has a "quiet" mode which minimizes traffic to and from the driver, useful for ill-behaved driver/controller combinations that might have timing issues. In quiet mode, POTH will not respond to changes made using the telescope's hardware handbox. Saluti
